DeSalin® K is a special cleaning formulation for fast and effective action. It is ideal for the removal of stains created by the use of “sticky” paint resins, cement residues and adhesive building material.
DeSalin® K is ideal for removing grout reside after laying floor tiles and removing rust from stones and cement surfaces with quick and effective action. However, it should not be applied to sensitive surfaces like marble (use DeSalin® T instead).
With quick and effective action
1) Rinse the stained surface with DeSalin® K without diluting or with up to 1:5 dilution ratio for slightly stained surfaces.
2) Wait for DeSalin® K to act on the surface for a minute.
3) Remove residues by scrubbing with a hard sponge (do not use metallic sponges). After removal, wash with plenty of water.
Attention: The use of protective clothing (gloves and resistant clothing) is required due to the acidic character of the formulation. Do not apply on metallic surfaces. Test the formulation on a minor non-visible surface to determine its chemical resistance and prevent potential damages. Do not mix with chlorines, bleach and sodium hypochlorite. DeSalin® K has a consumption rate of 6-8 square meters per kg.
Cement surfaces, mortar, grout, stucco, natural/artificial stones and
clay-based surfaces like roof tiles and roof tops.