An innovative water-proofing method developed by NanoPhos.
SurfaGuard® Metals is a water-based, nanotechnology formulation that inhibits metal corrosion and rust formation even in extreme environments (e.g. marine, high temperature). When used, the metal surface becomes passivated and a 3D network of nanoparticles prevents corrosive agents from reacting with the metal. SurfaGuard® Metals are useful for anti metal corrosion prevention.Buy now
Corrosion rate decreased
SurfaGuard® Metals decreases corrosion rate up to 10 times and preserves the gloss on shiny metallic surfaces. Superficial layers of rust are also passivated to create a shell against corrosion.
Prepares metals for paint application as well
SurfaGuard® Metals not only useful for anti corrosion prevention that inhibits corrosion and rush formation but also prepares the metallic surface for paint application as the adhesion of a polymer coating is enhanced.
Multiple application options
Shake or stir the container before use. Ensure that the application surface has to be clean and dry. Prior to application clean the surface with a cleaner or solvent. Then, apply SurfaGuard® Metals by either:
1) Immersing the metal for 3 - 10 minutes
2) Spraying 2 coats generously
3) Applying 2 coats by brush or roller.
Finally, remove excess of the material after application and let the material to dry and cure (up to 2 hours at ambient temperature). The estimated consumption rate of SurfaGuard® Metals is 5-8 m²/L (strongly dependant on the application method).